|
|
| LENGTHS: |
22 - 44 FEET |
| SIDE HEIGHTS: |
48 - 72 INCHES |
| TRAILER WIDTHS: |
96 - 102 INCHES |
| CAPACITY: |
28.4 - 60.6 CUBIC YARDS |
| WEIGHTS: |
9,520 - 12,760 Lbs |
| |
|
|
|
| Chasisis Specifications: |
|
|
BOGIE FRAME: |
ALUMINUM 42"
WIDE X 18"
DEEP X 110"
LONG WITH 5"
WIDE X 3/4"
THICK TOP
AND BOTTOM
FLANGE. |
|
DRAFT ARMS: |
FABRICATED
4' X 4" X
1/4" A500
STEEL WITH
3-1/2" X
3-1/2" X
3/16"
LATERAL |
| HOIST CYLINDER: |
FIVE STAGE HEAVY DUTY |
| HOIST BASE: |
FOUR 6" X
32" X 1/2"
STEEL PATE
SUPPORT TUBE
FOR 2" HOIST
PIN |
| STANDARD SUSPENSION: |
INTRAAX 300 AIR RIDE, 49" AXLE SPACING, CLOSED TANDEM |
| STANDARD AXLES: |
TWO 5" TUBULAR, 5/8" WALL - 25,000-LB. CAPACITY(71-1/2" TRACK) |
| STANDARD WHEEL: |
EIGHT (8) 8.25" X 24.5", 10-HOLE DISK, HUB PILOTED, UNIMOUNT, PLAIN ALUMINUM WHEELS |
| HUBS: |
FOUR (4) 10-STUD DURALITE, HUB PILOTED |
| BRAKES: |
16-1/2" x 7" Q-PLUS, NON ASBESTOS LINING WITH QUICK CHANGE FEATURES, AUTOMATIC SLACK ADJUSTERS, MERITOR WABCO 4S/2M ABS SYSTEM |
| DRUMS: |
OUTBOARD
MOUNT
LIGHT-WEIGHT
, HUB
PILOTED |
| STANDARD TIRES: |
MICHELIN XZE |
| STANDARD LANDING GEAR: |
HOLLAND MARK V. TWO-SPEED 50,000 LB CAPACITY WITH SAND SHOES, HANDLE MOUNTED ROADSIDE |
| KING PIN PLATE: |
37" X 46"
5/16" A-35
STEEL-ARTICULATING,
18" FROM
FRONT |
| ELECTRICAL: |
DOT, SEALED BEAM AND HARNESS |
| FINISH: |
SWIRL FINISHED
ALUMINUM FRAMES. STEEL FRAME PAINTED BLACK ENAMEL |
|
|
| Body Specifications: |
|
| |
|
| LONGITUDINALS: |
4" WIDE x 6" DEEP EXTRUDED ALUMINUM (6061-T6) |
| REAR FLOOR SILL: |
8" WIDE x 4" DEEP EXTRUDED ALUMINUM (6061-T6) |
| FLOOR SILLS: |
4 1/2" SIDE x 4" DEEP EXTRUDED ALUMINUM (6061-T6), 12" CENTERS, 7 1/2" APART |
| BOTTOM RAIL: |
"Z" DESIGN (6061-T6) INTERLOCKS FLOOR SILLS AND FLOOR TO SIDES. ALSO INCLUDES RADIUS CORNERS FROM FLOOR TO SIDES
|
| FLOOR: |
.230" ALUMINUM PLATE (5083) |
| SIDES: |
.150" ALUMINUM PLATE (5083) |
| BODY POST: |
EXTRUDED ALUMINUM (6061-T6) DESIGNED WITH 4 1/4" FACE FLARED TO 8". SOLID WELDED TO SIDE SHEETS AND LOCATED ON 24"CENTERS. 45-DEGREE SLOPE PLATES BETWEEN STIFFENERS, WELDED TO BOTTOM RAIL, PREVENT DEBRIS IN ACCUMULATION IN THIS AREA. |
| FRONT POST: |
FULL WRAP AROUND BULKHEAD |
| REAR POST: |
EXTRUDED ALUMINUM (6061-T6), 8" WIDE X 4" DEEP WITH 1/2" LIP TO SECURE SEAL FOR GATE
|
| TOP RAIL: |
EXTRUDED ALUMINUM (6061-T6)), 10" TOP RAIL STANDARD ON ALL LENGTHS |
| FRONT: |
.230 ALUMINUM (5083), 3/8" X 4" ALUMINUM BAND (6061-T6) AROUND TOP. BOTTOM RAIL SQUARED WITH MUD FLAPS. STEPS ON ROADSIDE, FRONT RADIUS. |
| HOIST BOX: |
TAPERED, FULLY ENCLOSED WITH INSPECTION HOLE |
| TAILGATE: |
.230" ALUMINUM (5083) WITH EXTRUDED DIRT SHEDDER BRACES (6061-T6), HEAVY-DUTY BOLT-ON HARDWARE. OVER SLUNG LATCHES PROVIDE POSITIVE LOCKING. AIR-OPERATED CONTROLS ARE LOCATED ON DRAFT ARM ROADSIDE BEHIND LANDING GEAR. SEALED TAILGATE AROUND OUTSIDE EDGE OF GATE. |
| TARP BAR: |
3 1/4" WIDE x 1/4" ALUMINUM. ONE ROW EACH SIDE FULL LENGTH WITH TARP HOOKS FRONT AND REAR |
|
ELECTRICAL:
|
SEALED BEAM LIGHTS RECESSED IN FACE SIDE STIFFENERS. MID TURN SIGNAL; CENTER MARKER LIGHT. ONE LIGHT ON REAR POST FACING REAR ON EACH SIDE. |
| MUD FLAPS: |
HEAVY-DUTY SPRAY SUPPRESSANT BLACK RUBBER |
| FINISH: |
TRADEMARKED SWIRL. STEEL PARTS PAINTED BLACK. CONSPICUITY TAPE |
|
|
